Select a Country or Region

Cold Shear

Inquiry

Share to

Cold Shear

Cold shear plays an important role in the rolling mills. The machine has high strength capacity to cut the product into desired lengths. It adopts a ball screw, linear guide and servo motor to drive the back gauge with high positioning accuracy with integrated steel welded structure, eliminate stress by vibration, with good rigidity. The serials' connection of the oil cylinder is to prevent the cutting angle changing during the operation of the fly shearing machine. It has the automatic adjustment of blade clearance for accurate, rapid and convenient operation. The adjustable shear angle is to reduce sheet distortion. Motorized back gauge and position display make it convenient and precise.

Feature of Cold Shear:


1. The housing is a closed frame structure, which adopts mechanical transmission. After starting the machine tool, the motor drives the flywheel to rotate on the high-speed gear shaft. When cutting starts, the footswitch is first operated by pressing the material, and then the footswitch of the machine tool is operated to suction compressed air into the solenoid. The solenoid sends compressed air to the cylinder to push the piston, which causes the friction clutch to mesh with the flywheel, then drives the starting gear to rotate, and then transfers from the starting gear to the intermediate gear. A small gear is transmitted to the large gear on the crankshaft. The crankshaft is connected to the slider through a connecting rod, and the slider moves up and down. During a single movement, the slider moves up and down one round to complete a shear. A pneumatic friction clutch brake is used to make the machine operation stable, flexible and reliable.

2. The mechanical transmission gears are all arc gears, which have a much longer life than common involute gears.

3. Lubrication is a concentrated lubrication of thin oil. The thin oil station is driven by the pull rod on the crankshaft so that the lubricant is continuously sent to each guide surface and sliding point.

 

Model

QA95-160

QA95-250

QA95-300

QA95-400

QA95-500

QA95-600

QA95-850

Rated shear force
(KN)

1600

2500

3000

4000

5000

6000

8500

Sliding block stroke
(mm)

160

100

100

100

100

100

140

Number of trips
(rpm)

25

25

25

20

20

15

20

Shear number
(rpm)

12-25

12-25

12-25

12-20

12-20

10-15

10-20

Cutting width
(mm)

450

550

650

750

800

1000

1300

Flywheel speed
(rpm)

608

608

608

555

555

730

700

Working table height
(mm)

500

540

700

540

650

600

850

Motor power
(KW)

37

45

45

55

75

75

110

Overall dimensions

Length
(mm)

2470

2470

2550

3010

3170

2810

4496

Width
(mm)

1660

1660

1690

2000

2000

3457

3285

Height
(mm)

2750

2750

3250

3400

3510

3658

4555

Contact us

+86 13796661748
Address: Daowai, Harbin City, Heilongjiang, 150050, China.