Bainitic Nodular Cast Iron Roll

Inquiry

Share to

Bainitic Nodular Cast Iron Roll

Bainitic nodular cast iron roll is made of Ni, Mn, CrH, Mo, etc. It has an acicular structure and would be higher strength and better toughness than pearlite iron. Due to the high alloy content and high casting stress, the acicular bainite ductile iron roll can obtain the ideal comprehensive performance by a centrifugal composite casting process. The feature of bainitic nodular cast roll is that it shaped into graphite ball and its performance can be compared with that of alloy indefinite chilled roll. Its intensity is higher than that of indefinite chilled one, so it is usually used for rest energy casting. The bainitic nodular roll manufactured by TINVO has the standards including ISO, GB, ASTM, DIN, JIS, high quality with the best price guaranteed.

Based on the analysis of the macro and microstructures of conventional Ni-Mo bainite ductile cast iron rolls used in bar finishing mills, we have found that the main cause of the spalling failure of the roll surface layer is the low bainite mass fraction in the roll structure, Irrational distribution of carbide morphology, and non-round graphite morphology.

On this basis, by optimizing the mass fraction of alloying elements of conventional bainite nodular cast iron composite rolls (nickel, copper, niobium composite alloying), the purpose of optimizing the structure and properties of the rolls is achieved. The structure of the improved roll is finer, and its carbide morphology has been significantly improved; meanwhile, the addition of alloying elements has significantly improved the bainite strength in the material, and its impact toughness, deflection, section shrinkage, and elongation after fracture are significantly improved compared with conventional Ni-Mo ductile iron, so it can significantly extend the service life of rolls and effectively reduce the production cost of steel.


Chemical Composition

Roll name

C

Si

Mn

Cr

Ni

Mo

Mg

AF1

3.00~3.50

1.60~2.40

0.40~1.00

0.10~0.40

1.20~2.00

0.20~0.60

≥0.04

AF2

3.00~3.50

1.40~2.20

0.40~1.00

0.20~1.00

1.50~2.50

0.30~0.80

≥0.04

AF3

3.00~3.50

1.20~2.0

0.40~1.00

0.20~1.00

2.00~3.00

0.30~0.80

≥0.04

 

Physical Properties

Roll name

Roll-body hardness     HSD

Tensile strength    Mpa

AF1

40~55

≥360

AF2

50~65

≥360

AF3

60~72

≥360

Enquiry